PAPER MILL PRESS SECTION HYDRAULIC SYSTEM
PAPERMILL PRESS SECTION:
- A provision of stand-by unit will give flexibility to get switched over to the second pump-motor unit in the event of unforeseen eventuality of problem in primary pump-motor drive unit which will keep up the plant production and the problem can then be attended at ease without loss of production.
- No need to run the power-pack motor continuously. Our system design will help you save your power cost. The motor will consume power only for a duration which is needed to develop the required pressure and the pressure will then get maintained and motor will be powered off. Whenever needed it will automatically start the motor-pump unit for 2-3 minutes and again it will be powered off. So it will save running cost and eliminate unwanted heat generation of hydraulic oil which otherwise will deteriorate properties of hydraulic oil.
- No fear of burnt-out of solenoid coils during running of plants inviting downtime and expenditure towards managing the parts.
- 2-HP/3-HP / 5-HP power unit will be used depending on system design- requirement of NIP load and type of leverage.
- Independent pressure regulation at both ends is available through high precision pressure reducing valve of a reputed brand to achieve consistency of performance.
- Highly Reliable and Branded Hydraulic and Electrical panel items for longer life and better performance
- Digital controller , Rital/ Eldon Enclosure, High Precision Gefran/ Honeywell pressure transmitters, Cromption Electric Motors, Rexroth/ Equivalent valves for Nip Load control, Polyhydron valves for load/unload operation, Schneider/ Equivalent switch gear components shall be used in system construction
QUICK REVIEW:
- Provision of stand by pump motor unit
- Reduced down time
- Inbuilt electrical control panel for selection of pump motor station.
- Power saving
- No heating of oil thereby viscosity of oil is maintained for a longer duration
- User friendly , Low maintenance system
HYD SYSTEM FOR PAPER MILL POPE REEL SECTION
POPE REEL HYDRAULICS :
- A provision of stand-by unit will give flexibility to get switched over to the second pump-motor unit in the event of unforeseen eventuality of problem in primary pump-motor drive unit which will keep up the plant production and the problem can then be attended at ease without loss of production.
- Independent regulation of tension at both ends of secondary arm for pressing.
- 2 Nos of locking cylinder + 2 Nos of pressing cylinders.
- 2-HP power unit
- Hand lever operation- No downtime because of coil burnt-out in case of power fluctuations.
QUICK REVIEW:
- Provision of stand by pump motor unit
- Reduced down time
- Inbuilt electrical control panel for selection of pump motor station.
- No heating of oil thereby viscosity of oil is maintained for a longer duration
- User friendly , Low maintenance system.
We can also supply hydraulic re-winder system for slitting line to suit your requirement
Customer List :
- D.S. Pulp and Paper Machinery Pvt Ltd
- Honest Iron & Engineering Works.
- Reliable Paper Mill-Bardoli
- Speciality Paper Mill-Vapi
- Rayana Paper Board Industries Ltd-Gorakhpur
- Bhagwatikrupa Paper Mill-Jaipur
- Shree Ajit Pulp & Paper Ltd-Vapi
- Hardoli Paper Mill-Nagpur
- Godawari Pulp & Paper Mill Ltd- Nashik
- Swastik Paper Mill-Nashik
- VenKraft Paper Mills Pvt Ltd- Hosur
- Kingston Paptech Pvt Ltd-Prantij ( Gujarat )
- Rama Pulp & Paper Mill- Vapi ( Nath Group )
- Pinax Paper Mill- West Bengal
- Shree Andal Paper Mill
- Deoria Paper Mill
- Shri hari paper – Indore
- Best paper Mill- Vapi
- Shree Suyansh paper mill