HPR-005 : ASSLY WITH ONLINE INSPECTION
General Information :
• 2 HP HYDRAULIC POWER-PACK FOR 5 T CAPACITY PRESS.
• 4-PILLAR GUIDED MOVING TYPE FRAME FOR UNIFORM DISTRIBUTION OF LOAD.
• AUTO AND MAINTENANCE MODE SELECTION FROM PANEL. IN MAINTENANCE MODE, PLC OPERATION WILL BE BY-PASSED.
• PUSH BUTTONS FOR LOADING TABLE MOVEMENT.
• LOAD CELL WILL MEASURE THE AVAILABLE FORCE AND FEED THE INFORMATION TO PLC SYSTEM.
• LINEAR SCALE WILL MEASURE THE APPROACH AND PRESSING LENGTH AND GIVE FEEDBACK TO PLC SYSTEM.
• RAMP RATE SHALL BE CONTROLLED BY HYDRAULIC SYSTEM TO APPLY THE FORCE IN A LINEAR PATTERN.
• RITTAL ENCLOSURE WITH ALL THE ELECTRICAL PROTECTION SYSTEMS AND UTILITIES LIKE TUBELIGHT, COOLING FAN, EXTRA PLLUG SOCKET, GLASS FUSE TERMINALS, BARRIERS ETC.
• THE SELECTIVE ASSLY WILL BE SELECTED FROM HMI DROP DOWN MENU AND ALL THE REQUIRED PARAMETERS SHALL BE SET AUTOMATICALLY.
• PHOTOELECTRIC SENSORS SHALL HELP DETECT POSITION FOR THE DEPTH OF TRAVEL CONTROL.
• HIGH END PLC AND HMI MAKES THE SYSTEM RELIABLE AND ACCURATE
• TOWERLIGHT INDICATION FOR IDENTIFYING THE TEST RESULTS: GREEN LIGHT FOR ACCEPTED ASSEMBLY, YELLOW LIGHT FOR RE-WORK ASSEMBLY AND RED LIGHT FOR REJECTED ASSEMBLY.
• NO DIMENSIONAL QUALITY CHECKS REQUIRED BEFORE ASSEMBLY FOR MAKING SELECTIVE ASSEMBLY.
HPR-04 C FRAME : WITH ONLINE INSPECTION
• 2 HP HYDRAULIC POWER-PACK FOR 4 T CAPACITY PRESS.
• C- FRME STRUCTURE FOR EASE OF OPERATOR TO PLACE THE COMPONENT ON PRESS TABLE.
• AUTO AND MAINTENANCE MODE SELECTION FROM PANEL. IN MAINTENANCE MODE, PLC OPERATION WILL BE BY-PASSED.
• LOAD CELL WILL MEASURE THE AVAILABLE FORCE AND FEED THE INFORMATION TO PLC SYSTEM.
• LINEAR SCALE WILL MEASURE THE APPROACH AND PRESSING LENGTH AND GIVE FEEDBACK TO PLC SYSTEM.
• RAMP RATE SHALL BE CONTROLLED BY HYDRAULIC SYSTEM TO APPLY THE FORCE IN A LINEAR PATTERN.
• RITTAL ENCLOSURE WITH ALL THE ELECTRICAL PROTECTION SYSTEMS AND UTILITIES LIKE TUBELIGHT, COOLING FAN, EXTRA PLLUG SOCKET, GLASS FUSE TERMINALS, BARRIERS ETC.
• THE SELECTIVE ASSLY WILL BE SELECTED FROM HMI DROP DOWN MENU AND ALL THE REQUIRED PARAMETERS SHALL BE SET AUTOMATICALLY.
• PHOTOELECTRIC SENSORS SHALL HELP DETECT POSITION FOR THE DEPTH OF TRAVEL CONTROL.
• HIGH END PLC AND HMI MAKES THE SYSTEM RELIABLE AND ACCURATE
• TOWERLIGHT INDICATION FOR IDENTIFYING THE TEST RESULTS: GREEN LIGHT FOR ACCEPTED ASSEMBLY, YELLOW LIGHT FOR RE-WORK ASSEMBLY AND RED LIGHT FOR REJECTED ASSEMBLY.
• NO DIMENSIONAL QUALITY CHECKS REQUIRED BEFORE ASSEMBLY FOR MAKING SELECTIVE ASSEMBLY.
HPR-100 : Cold Powder Compaction Press
General Information :
• APPLICATION: POWDER COMPACTING OF DIAMOND WHEEL POWDER.
• CAPACITY: 100 MT
• DAY LIGHT GAP:
• DISTANCE BETWEEN PILLARS:
• FRAME: 4 PILLAR GUIDED MOVING TYPE FOR UNIFORM DISTRIBUTION OF LOAD
• POWER REQUIREMENT:
• OPERATION: PUSH BUTTON OPERATION
• SEQUENCE: AUTO AND MANUAL MODE
HPR-050 : Straightening of Heat Sink
APPLICATION: STRAIGHTENING OF HEAT SINK
• CAPACITY: 50 MT
• POWER REQUIREMENT:
• DAY LIGHT (OPEN):
• DAY LIGHT (CLOSE):
• CLEAR DISTANCE BETWEEN PILLAR TO PILLAR:
• FRAME: 4 PILLAR GUIDED MOVING PLATEN
• DISPLAY OF MOVEMENT OF PLATE IN FORWARD AND RETRACT DIRECTION DURING PRESSING
• HYDRAULIC VALVE FOR FORCE CONTROL
• HYDRAULIC VALVE FOR MOTION CONTROL
• SMOOTH OPERATION
• OPERATOR FRIENDLY SYSTEM